Products

电动推拉门.jpg
电动推拉门2.jpg
电动推拉门3.jpg
电动推拉门4.jpg
电动推拉门5.jpg
+
  • 电动推拉门.jpg
  • 电动推拉门2.jpg
  • 电动推拉门3.jpg
  • 电动推拉门4.jpg
  • 电动推拉门5.jpg

Electric sliding door

The gate is mainly composed of guide rails, walking wheels, door openers, door leaves, casing transmission components, control systems, etc. The door leaf is suspended on the guide rail through the walking wheel, and the door opener drives the walking wheel to move through the transmission component, so as to realize the opening and closing of the door leaf, and the walking wheel adopts a four-wheel structure. The lower part of the door leaf is provided with a lower guide, which can effectively limit the front and rear deflection of the door leaf. The safety system can be equipped with an anti-collision device. If the door leaf touches an obstacle when it is opened and closed, it will immediately stop running or return to the full open state, and an automatic device can be equipped. (Remote control or light control) The door leaf adopts color steel, stainless steel sandwich panel, filled with hard polyurethane, styrene or rock wool in the middle; The door leaf edge can be made of aluminum profile, plastic spray profile and stainless steel profile. The door leaf can be provided with lighting window. The guide rail is a special cold-rolled profile or H-shaped steel (cold-rolled profile is selected as the guide rail when the weight of the door leaf is small X500kg, and H-shaped steel is selected as the guide rail when the weight of the door leaf is greater than 500kg.)

Category:

Electric sliding door series

E-mail：

475598747@qq.com

Message
Related Related

Description

Basic parameters

Structure principle

The gate is mainly composed of guide rails, walking wheels, door openers, door leaves, casing transmission components, control systems, etc. The door leaf is suspended on the guide rail through the walking wheel, and the door opener drives the walking wheel to move through the transmission component, so as to realize the opening and closing of the door leaf, and the walking wheel adopts a four-wheel structure. The lower part of the door leaf is provided with a lower guide, which can effectively limit the front and rear deflection of the door leaf. The safety system can be equipped with an anti-collision device. If the door leaf touches an obstacle when it is opened and closed, it will immediately stop running or return to the full open state, and an automatic device can be equipped. (Remote control or light control) The door leaf adopts color steel, stainless steel sandwich panel, filled with hard polyurethane, styrene or rock wool in the middle; The door leaf edge can be made of aluminum profile, plastic spray profile and stainless steel profile. The door leaf can be provided with lighting window.

The guide rail is a special cold-rolled profile or H-shaped steel (cold-rolled profile is selected as the guide rail when the weight of the door leaf is small X500kg, and H-shaped steel is selected as the guide rail when the weight of the door leaf is greater than 500kg.)

Main technical parameters

Selection code TM1
Opening size
(Mm)		 Width 3000-9600
Height 3000-9600
Reserved dimension of opening upper edge (mm) ≥ 470
Voltage (V)/Frequency (Hz) 380/50
Power (KW) 0.68
Starting current (KW) <4
Running speed (m/min) =9.5
Steel, stainless steel surface door leaf weight (kg/m2) 25-35
Door leaf thickness (mm) 40-100

Basic parameters

Door opening size parameter table

One-way sliding door

Door opening
Broad B		 Door opening
Wide a		 C D E F
≤ 4800 ≤ 9000 180 B 300 ≥ 470 ≥ 300
B 300 180

Two-way sliding door

Door opening
Broad B		 Door opening
Wide a		 C D E F
≤ 9600 ≤ 9000 B/2 180 B/2 300 ≥ 470 ≥ 300
B/2 300 B/2 180

Message

Submit